Resin ashtray open mold with mold rubber usage

by:Cupidove     2020-05-06

resin ashtray open mold with mold plastic operation method:

1, silicone and curing agent. Mold silicone appearance is flowing liquid, A component is silica gel, team B is curing agent. Example: take 100 grams of silica gel, add 2 grams of curing agent ( Note: silicone and curing agent must stir well, if there is no uniform mixing, the mould will be a piece of has solidified, a no cure, silica gel can appear uneven drying curing condition will affect the service life of the die and the silicone mold number, and even cause mold scrapped.

2, vacuum exhaust bubble processing: after silicone and curing agent mix, vacuum exhaust bubble link, vacuumizing time shoulds not be too long, under normal circumstances, not more than ten minutes, vacuum time is too long, the silicone products curing immediately, the crosslinking, make the silicone products piece by piece, cannot besmear to brush or infusions, thus wasting the silica gel, can only put silica gel in the trash, to take silica gel to do again.

tea table of resin for mould plastic resin ashtray open mold with mold plastic

3, besmear to brush, or operation process: the time pai bubbles of silica gel, by brushing or perfusion. Pour in the product above ( Note: to replicate before pouring silicone products products or model release agent must be hit or isolation agent) 。 Then put the silica gel coating on product, besmear brushs must be uniform, a layer of gauze in firbre cloth paste 30 minutes to increase the strength of the silicone and tension. And coating a layer of silica gel, then a layer of gauze in firbre cloth paste, so after two is ok. Only by doing so, out of the silicone mold service life and mould number relative to improve a lot, can save cost and improve efficiency.

4, mode of production: the general methods and materials is to mold all round, with rubber plate or wood, used a plaster will die ark filled is ok, another way of using resin coating, coating a layer of a layer of glass fiber cloth paste resin, besmear again brush and then paste, repeated two or three layer, can complete the die mould.


In the present growing world of emerging technology, the has demanding operation in various sectors like manufacturer of silicone products, manufacturer of silicone products, manufacturer of silicone products and many other industries at manufacturer of silicone products levels of manufacturing and designing.
We are dedicated to providing you with more than just customer service by utilizing our qualified team who pride themselves on meeting and exceeding customer's needs. We also have ell-equipped plantin China with advanced facilities to manufacture manufacturer of silicone products Sex toys products according to customers requirements. Welcome to send your enquiry and visit our factory. Our website is Cupidove.
When it comes to Sex toys manufacturer of silicone products, Hongkong Cupid Limited is the name to reckon with. Not only are they best, they are the most experienced as well and provide wide range of services as well as products at affordable prices. Find out more information on Cupidove.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...