Leave a message for me.
Start contacting us and learn more about our products
birthday candles mold silicone
birthday candles mold silicone feature:
1) mold silicone rubber has good operating performance.
(2) silica gel better mobility, low viscosity easy to operate.
(3) silicone rubber shrinkage as small as possible.
(4) better tensile strength of the silicone rubber.
5) to the silicone mold deformation.
6 silicone products rubber hardness to suitable for products.
7) high temperature resistant, rolling over more, the longer service life, the better, resistant to acid and alkali resistant to ageing.
the method of making the birthday candles mold silicone
1, with a plastic bowl for 500 g glue, curing agent 1 at room temperature. 5%, fully stir well. Set aside.
2, the original mould release agent processing lubrication.
3, lubrication good original mould around sticks, wood and application of release agent, in the middle of the gap to 2 - It is advisable to 4 cm.
4, with good glue along a fixed infusion point slowly pouring, not when the shocks to eliminate the air inside. 5, 60 minutes after the glue solidified completely around sticks around again, stay 4 cm gap, in addition to the log.
6, the gypsum powder after water injection against 1000 g wood box, fill ( Wood plastic box application is divided into two parts and ripping) 。
7, 20 minutes after dismantling batten, mould is completed.
1, the amount of curing agent added should be depending on the temperature, the temperature decreases. Excessive dosage of curing agent, mold can harden brittle; Curing agent used, less operation time will be extended.
2, to prevent mold silicone property changes, suggested that without silicone oil.
3, for your mould to use effect, please put the measurement for at least 24 hours after the use of
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.